The business command center for makers who sell what they make.
Stop guessing what your work should cost.
One place for your making business: real production costs, confident prices, inventory, machines and orders, and what you are earning after the costs you track.
Or try a free cost calculator, no sign-up- No card needed for the trial
- $39 one-time + tax
- Built by makers
True cost calculator
Go beyond filament: power, machine wear, your time, fees and failures.
Materials and inventory
Filament, sheets and blanks with a real cost per gram or piece, and low-stock warnings.
Pricing and profit
Set the right price and see your profit and margin after fees.
Orders and production
Quotes, orders and the production queue, and what each order actually earned.
3D printing, laser and CNC
Built for 3D printing, laser engraving and CNC, in one account.
See it in one minute
A quick tour of the real app: adding a product, seeing its true cost, and tracking what your orders actually earned.
One modern workspace
Everything you need to run a profitable making business.
From true costs to inventory, orders and pricing, FabriDock brings the business side of your shop into one clean, easy-to-use place.
- Costs worked out from your own machines and materials
- Built by a maker shop, for makers
- Works on your phone, tablet and computer
Profit per dragon
$21.29
60.8% marginReal screens from a demo shop.
The costs most makers miss
Filament cost is only the beginning.
Your slicer tells you how much filament a print uses. We tell you whether that print actually makes money.
Miss enough of these and a print that looks profitable earns a fraction of what you think — or loses money while you make more of them.
Your printer time has value.
Two products at the same price are not equally worth making. What separates them is how long they tie up a machine you only have one of.
Product A
$50.00
8 print hours
$4.38/h
profit per printer hour
Product B
$50.00
27 print hours
$1.30/h
profit per printer hour
Illustrative figures, both assuming $15.00 of cost. Same sale price; one earns more than three times as much per hour of machine time.
The costs most makers miss
The blank is only the beginning.
A laser job looks cheap when you only count the tumbler or the board. What it really costs is everything else that goes into it.
FabriDock for Laser Engraving counts every one of these, per product and per batch.
Your laser time has value.
Two jobs at the same price are not equally worth taking if one keeps the machine busy three times as long, and on a busy day your laser is the limit on what you can sell.
Job A
$25.00
20 laser minutes
$51.00/h
profit per laser hour
Job B
$25.00
60 laser minutes
$17.00/h
profit per laser hour
Illustrative figures, both assuming $8.00 of cost. FabriDock for Laser Engraving shows the profit per laser hour on every batch.
The costs most makers miss
The board is only the beginning.
A carved sign is worth far more than the wood it started as, and it costs more to make than the wood, too.
FabriDock for CNC counts every one of these.
Your CNC time has value.
Carving takes hours, and a CNC can only cut one piece at a time. Two signs at the same price are not equally worth making if one keeps the machine cutting more than three times as long.
Sign A
$60.00
1.5 machine hours
$26.67/h
profit per machine hour
Sign B
$60.00
5 machine hours
$8.00/h
profit per machine hour
Illustrative figures, both assuming $20.00 of cost. FabriDock for CNC shows the profit per machine hour on every batch.
One place to run the business side
FabriDock for 3D Printing is available now, with a 14-day free trial.
True cost calculator
Filament, machine wear, power, labour, hardware, packaging, fees and a failure allowance — in one number you can price against.
Filament inventory
Cost per gram worked out to six decimal places from the spool price, with remaining weight, value and low-stock warnings.
Printer management
Purchase price and expected lifetime become a real cost per hour, so machine wear stops being invisible.
Business dashboard
Inventory value, active machines and low stock, read from your own data. No sample figures dressed up as yours.
Profit per print hour
The number that tells you which products are actually worth making when your machines are the bottleneck.
Margin done properly
Margin and markup are not the same thing, and fees come out of the sale price. Both handled correctly, both shown.
FabriDock for Laser Engraving is available now, with a 14-day free trial.
True cost per product
The sheet or blank, laser time, power, wear, finishing, your time and fees, in one number to price against.
Batch calculator
Fifty bottle openers or a hundred tags: run time, whole sheets to pull, what is short in stock, and the profit.
Settings library
The power, speed, frequency, passes and focus that worked, per laser and material, so you never rerun a test grid.
Materials with safety guidance
Sheets and blanks with a real cost per piece, low-stock warnings, and which materials should never go in a laser.
QR labels and jigs
Stick a label on a sheet, bin or jig. Scan it with your phone and the settings that worked come up.
Laser running costs
CO2, fiber, UV and diode machines, with what an hour of each really costs you.
FabriDock for CNC is available now, with a 14-day free trial.
True cost per piece
Stock, bit wear, machine time, power, setup, finishing, your time and fees, in one number to price against.
Stock and bits
Boards and sheets with a real cost per piece, and bits that count their cutting hours and show Replace when they are worn.
Feeds and speeds
The RPM, feed, plunge, depth and stepover that worked, per machine, material and bit, with the chipload worked out for you.
Batch calculator
A nested sheet of signs or parts: sheets to pull, whether your bits will last the run, and what it earns per machine hour.
Fixtures and QR labels
Labels for your stock, bits, recipes and jigs. Scan one with your phone and the setup that worked comes up.
Maintenance log
Belts, rails, spoilboard and spindle work with what it cost, counted in the machine’s hourly cost, with a reminder when the next one is due.
9
costs counted beyond the filament, in every 3D print price
14 days
free trial, no card needed
$39 + tax
one-time, no subscription
Who it's for
- Etsy sellers
- Craft show and market sellers
- TikTok and Facebook sellers
- Custom print shops
- Print farms
- Side hustlers and new 3D printing businesses
How it works
- 1
Add your printers and materials
Once. This sets your real cost per hour and per gram.
- 2
Build your products
Print time, every filament it uses, hardware and packaging.
- 3
Calculate your true cost
Material, machine time, your time and fees, not just the filament.
- 4
Track orders and production
What is sold, what is printing, what it earned.
- 5
See what the business is actually making
By product, by printer, by hour.
Who it's for
- Personalised gift sellers
- Tumbler and drinkware engravers
- Sign and plaque makers
- Custom engraving shops
- Etsy sellers
- Craft show and market sellers
How it works
- 1
Add your laser and materials
Once, to set your real cost per hour and per piece.
- 2
Save the settings that work
Power, speed and passes per material, with a QR label to bring them back.
- 3
Build your products
Laser time, the sheet or blank, extras and packaging.
- 4
Plan a batch
Run time, the sheets to pull and what the run earns.
- 5
See what each job really makes
By product and by laser hour.
Who it's for
- Woodworkers selling signs and boards
- Home decor and furniture makers
- Custom sign shops
- Small production and job shops
- Etsy sellers
- Craft show and market sellers
How it works
- 1
Add your CNC, bits and stock
Once, to set your real cost per hour, per bit and per piece.
- 2
Save the feeds and speeds that work
RPM, feed and depth per bit and material, with a QR label to bring them back.
- 3
Build your products
Machine time, the board or sheet, bits and finishing.
- 4
Plan a batch
The sheets to pull, whether your bits will last, and what the run earns.
- 5
See what each piece really makes
By product and by machine hour.
Free · no sign-up
Price one job right now, free.
Type in your numbers and see what a job really costs and what to charge for it after fees. Nothing to sign up for and nothing saved. It runs on the same pricing engine as FabriDock.
3D print cost calculator
Filament, printer wear, power, your time and failed prints, then the price that leaves a profit.
Open the calculatorLaser engraving price calculator
Sheets and blanks, laser minutes, setup spread over the run, and a price for each item.
Open the calculatorCNC job cost calculator
Boards and sheets, bit wear, machine time and setup, and what each part should sell for.
Open the calculatorSimple pricing
One price. Every machine.
Pay once and it's yours for life. No subscription, no tiers, nothing to add later.
FabriDock
$39one-time + tax
Lifetime access to everything, for your whole business.
- Every machine in one account
- Orders, quotes, expenses and reports
- Every future update, free
- Your data stays yours
No card needed. Then $39 once (plus tax), by secure Stripe checkout.
Included
3D Printing
Ready nowTrue cost calculator, filament inventory, printers, products and production.
Laser Engraving
Ready nowTrue cost per product, batch calculator, settings library, materials and QR labels.
CNC
Ready nowTrue cost per piece, stock, bits and tools, feeds and speeds, batches and fixtures.
Questions
- What is FabriDock?
- Business software for makers who sell what they make: 3D printing, laser engraving and CNC. It works out the true cost of each product, helps you price it, and keeps your machines, materials, orders and profit in one place.
- Do I need to install software?
- No. It runs in your browser, and can be installed as an app where your device supports it.
- Does it work on my phone or tablet?
- Yes. It works in your phone’s browser and can be added to your home screen. It needs an internet connection: your data is kept safely online, not on one device.
- Does it connect to or control my printer or laser?
- No. It manages the business side, not the machine. You keep using your slicer and your laser software to run the job; this tells you what that job costs and whether it makes money.
- Can I use this for Etsy and other marketplaces?
- Yes. Marketplace and payment fees are built into the pricing, so the profit you see already allows for them. Orders are entered by hand or imported from a spreadsheet; there is no automatic marketplace sync yet.
- Does it replace accounting or tax software?
- No. It tracks costs, sales, expenses and profit, with reports by month that make your accountant’s job easier, but it is not bookkeeping or tax software and does not give tax advice.
- Can it tell me whether I am allowed to sell a model or design?
- No. It helps you record the licence information you already have. It does not give legal advice.
- Is this a subscription?
- No. FabriDock is a one-time payment of $39 (plus tax) for every machine, and it is yours for life, with every future update included.
- How does the free trial work?
- Every new account gets 14 days of everything that is released, with no card needed. Use it on your real products and decide from that.
- What happens when the trial ends?
- Nothing is deleted or locked away. If you have not bought anything, you move to the free plan: up to 2 machines and 10 products for each kind of machine and 25 orders a month, with full reports. Buying lifetime access removes the limits.
- What do I get for the price?
- Everything: 3D Printing, Laser Engraving and CNC, in one account, for $39 once (plus tax).
- Can I get a refund?
- Because you can use everything free for 14 days first, purchases are final, except where the law where you live says otherwise. If something does not work as it should and we cannot fix it, we refund you. The Refund Policy has the details.
- Can I use multiple printers?
- Yes, as many as you run, each with its own running cost per hour.
- Can I track multiple filament colours?
- Yes. A print can use any number of filaments, each with its own weight and cost, and spools are tracked as you use them.
- Which lasers does it support?
- CO2, fiber, UV and diode lasers. Each machine gets a profile with what an hour of it really costs you, including power and tube or diode wear.
- What goes into the cost of a laser job?
- The sheet or blank, laser time, power, machine wear, finishing, your time, and marketplace and payment fees, in one number you can price against.
- Can it remember the settings that worked?
- Yes. The settings library keeps power, speed, frequency, passes and focus for each laser and material. Print a QR label for a sheet, bin or jig, scan it with your phone, and the settings come up.
- Does it warn me about materials that are unsafe to laser?
- Yes. The material library flags materials that should never go in a laser, such as PVC and vinyl, which give off chlorine gas that is harmful to breathe and corrodes the machine.
- Can I price a batch, like fifty tags at once?
- Yes. The batch calculator works out the run time, the whole sheets to pull, anything you are short of in stock, and the profit on the batch.
- Does it replace my laser software?
- No. You still design and run jobs in your laser software. This handles the cost, the settings records, your materials and your orders.
- What does the CNC edition do?
- Cost per piece from stock, bits and their wear, machine time, power, finishing and your time; material and tooling libraries; feeds and speeds; batch costing for nested sheets; QR labels for setups and fixtures; and a maintenance log for each machine, with reminders when a job is due.
- Will CNC work with my router or mill?
- It is built for hobby and small-shop CNC routers and mills, and works in inches or millimeters. Like the other editions, it does not control the machine; it covers the cost, setups, stock and orders around it.
- Is my data private?
- Yes. Your shop’s data is visible only to your account. We do not sell it, share it with advertisers or use it to train anything, and the Privacy Policy explains exactly what is kept and why.
- How is my account protected?
- You can turn on two-step sign-in with an authenticator app, you are emailed when your account is used from a new device, and Your account shows where you are signed in, so you can sign any device out.
- Can I get a copy of my data?
- Yes, your data is yours. You can download the 3D model files you upload at any time. A one-click export of all your records is not built yet; until it is, email us and we will send you a copy of everything.
Something else? Ask us.
Ready to grow your maker business?
Start your 14-day free trial today.
Know what everything you make really costs, price it with confidence, and see what your shop is actually earning.
Or try a free cost calculator, no sign-up- No card needed for the trial
- $39 one-time + tax
- Built by makers